- JCO Pipe Forming Press
- Press Brake
- CNC Servo Press Brake
- CNC Press Brake
- Heavy Duty Press Brake
- Press Brake in Tandem
- Cute Press Brake
- CNC Torsion Press Brake
- Corrugation Plate Bending Line
- NC Press Brake
- Plate Bending Machine
- 4 Rollers Plate Bending
- Universal Plate Bending Machine
- Mechanical Plate Bending Machine
- Long Plate Bending Machine
- Asymmetric Plate Bending
- Shearing Machine
- Hydraulic Press
- Tube Bending Machine
- Ironworker
- Section Bending Machine
- Folding Machine
- Mechanical press
- Cut to Length Line
- Laser Cutting
- Parameters
- Pictures
- You May Like
- Inquiry Now
QC12Y-4x1600 Hydraulic Swing Beam Shearing Machine
PARAMETERS:
|
Model(QC12Y) |
4x1600 |
|
Shearing thickness (mm) |
4 |
|
Shearing width (mm) |
1600 |
|
Cutting plate tensile strength N/mm² |
450 |
|
Shearing angle (°) |
1.5 |
|
Back gauge range (mm) |
20-500 |
|
Blade length (mm) |
1700 |
|
Throat depth (mm) |
80 |
|
Blade material |
6CrW2Si |
|
Main motor power (KW) |
4 |
|
Stroke (n/min) |
25 |
|
Length (mm) |
2150 |
|
Width (mm) |
1400 |
|
Height (mm) |
1400 |
--Features
▲ swing beam design
▲ Better cutting accuracy in thin sheets at lower rake angle.
▲ Higher cutting capacity at maximum rake angle.
▲ Low noise & smooth operation gives higher efficiency of operator.
▲ Less power consumption.
▲ Better safety for operator and machine.
▲ Front sheet support.
▲ Squaring arm with steel rule for front gauging.
▲ Hardened Transfer bars mounted on table.
▲ Hold down cylinders.
▲ Foot pedal with emergency stop
▲ Four edge 6CrWi2Si Blade suitable to MS & SS.
▲ Hardened & ground ball screw with linear motion bearings.
▲ Stroke counting on screen.
--Blade Gap Adjustment
--Swing Beam Design
--Modern Block Hydraulics
-- Motor & pump
--E21s controller
-- Pipe connection
shearing machine, cutting, swing beam shearing machine, hydraulic shearing machine, shearer
